<![CDATA[About Ezbond Chemical Co., Ltd.]]> http://www.ezbond.com.tw Mon, 25 Apr 2022 17:23:29 +0800 3600 <![CDATA[High Tech Electronic Products Dow Silicone Electronic Product - Adhesive/ Sealant Material (01)(2022/Apr/26 16:03:13)]]> http://www.ezbond.com.tw/packing_material.html?CID=1_1 They are used in the electronic part and the hardware design with the adhesive and sealant has bears the excellent performance of the temperature impact aging, the absorbance effect of the cushion experiment. It is easy to repair and re-workable, excellent performance of the sealing and moisture-proof

(2022/Apr/26 16:03:13)]]>
Tue, 26 Apr 2022 16:03:13 +0800
<![CDATA[High Tech Electronic Products Dow Silicone electronic Product - Encapsulant Material (02)(2022/Apr/26 16:03:41)]]> http://www.ezbond.com.tw/Product-200932103611.html?CID=1_1 When the silicone material injected in the electron module to cure to the elastomer that will not result the contraction and exothermic, may isolate the moisture, the dust and has bears with cushion absorbance. Moreover, are also the extremely excellent material with insulation and heat radiation.

(2022/Apr/26 16:03:41)]]>
Tue, 26 Apr 2022 16:03:41 +0800
<![CDATA[High Tech Electronic Products Dow Silicone electronic Product - Conformal Coating Material (03)(2022/Apr/26 16:03:59)]]> http://www.ezbond.com.tw/Product-200934174729.html?CID=1_1 The material applies to protect the assembled circuit module with good signal & well performance when sitting in extremely tough environment, ex. extremely high & low temperature、chemical solvent、high pollution (ex. Dust & high-humidity). Easy to apply on circuit board by ways of soak、brush、spray with forming a thin-wall protected membrane. It is also easy to repair or re-workable.

(2022/Apr/26 16:03:59)]]>
Tue, 26 Apr 2022 16:03:59 +0800
<![CDATA[High Tech Electronic Products Dow Silicone electronic Product - Thermal Conductive Material (04)(2022/Apr/26 16:04:16)]]> http://www.ezbond.com.tw/Product-200934175432.html?CID=1_1 This silicone material has provided the extremely good heat conduction and the heat transfer effect to the released-hot electronic part with the shape of grease or glue.

(2022/Apr/26 16:04:16)]]>
Tue, 26 Apr 2022 16:04:16 +0800
<![CDATA[High Tech Electronic Products Dow Silicone electronic Product - Thermal Conductive Pad (05)(2022/Apr/26 16:04:38)]]> http://www.ezbond.com.tw/Product-200934182919.html?CID=1_1 This material belongs to the silicone thermal conductive material, has the convenience operation, each kind of thickness suitable to use in the thermal conductive interface of each kind of different organization design which has the extremely good characteristic of the thermal conduction. It is soft and smooth, also has the characteristic of insulation and corrosion resistance.

(2022/Apr/26 16:04:38)]]>
Tue, 26 Apr 2022 16:04:38 +0800
<![CDATA[High Tech Electronic Products Dow Silicone Electronic Product – LED Packaging (06)(2022/Apr/26 16:11:09)]]> http://www.ezbond.com.tw/Product-2010624105120.html?CID=1_1 Dow Corning Silicone Electronic Product – LED Packaging
Dow Corning silicone solutions for LED packages are
designed to meet the challenging needs of the LED market.
Silicone products offer good compatibility with standard LED
substrates and processing techniques. The Dow Corning
product line contains gels, elastomers and resins.

(2022/Apr/26 16:11:09)]]>
Tue, 26 Apr 2022 16:11:09 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Glue - Electrical Machinery / Electron Industry (01)(2022/Apr/26 16:09:08)]]> http://www.ezbond.com.tw/Product-200938222722.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction/heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:09:08)]]>
Tue, 26 Apr 2022 16:09:08 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - LCD Liquid-Crystal Display Module (02)(2022/Apr/26 16:09:28)]]> http://www.ezbond.com.tw/Product-200938223630.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:09:28)]]>
Tue, 26 Apr 2022 16:09:28 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - Optics Module (03)(2022/Apr/26 16:09:44)]]> http://www.ezbond.com.tw/Product-200938224347.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:09:44)]]>
Tue, 26 Apr 2022 16:09:44 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - PCB Electric Road Board Assembly (04)(2022/Apr/26 16:10:00)]]> http://www.ezbond.com.tw/Product-200938225853.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:10:00)]]>
Tue, 26 Apr 2022 16:10:00 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - Smart Card (05)(2022/Apr/26 16:10:16)]]> http://www.ezbond.com.tw/Product-20093823511.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:10:16)]]>
Tue, 26 Apr 2022 16:10:16 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - Medical Devices (06)(2022/Apr/26 16:10:32)]]> http://www.ezbond.com.tw/Product-20093823813.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:10:32)]]>
Tue, 26 Apr 2022 16:10:32 +0800
<![CDATA[Electrical Machinery / Electron Industry Panacol UV Light Curing Rubber - Glass Bonding (07)(2022/Apr/26 16:10:48)]]> http://www.ezbond.com.tw/Product-20093823156.html?CID=2_2 Panacol's expertise to provide uses in the electric circuit board assembly and the other industry adhesive product specially, its product classification is the Vitralit® UV light curing glue, the Elecolit® electric conduction / heat conduction glue material, the Structalit® one-part / two part epoxy resin, the Penloc® fast curing acrylic fabric glue, the Cyanolit® instantaneous adhesive, the Cerastil® super-high temperature ceramics adhesive. Panacol devotes to promote the Vitralit® UV light curing glue especially in the special industry.

(2022/Apr/26 16:10:48)]]>
Tue, 26 Apr 2022 16:10:48 +0800
<![CDATA[Industrial Used then Medicinal Preparation UL Industrial Rubber - Adhesive (01)(2022/Apr/26 16:08:11)]]> http://www.ezbond.com.tw/Product-20093821523.html?CID=3_3 UL 94 V-0 industrial adhesive.

(2022/Apr/26 16:08:11)]]>
Tue, 26 Apr 2022 16:08:11 +0800
<![CDATA[Industrial Used then Medicinal Preparation UL Industrial Encapsulanat / Conformal Coating (02)(2022/Apr/26 16:08:26)]]> http://www.ezbond.com.tw/Product-20093822124.html?CID=3_3 Tue, 26 Apr 2022 16:08:26 +0800 <![CDATA[Industrial Used then Medicinal Preparation Lubricating Oil Applies to Plastics (03)(2022/Apr/26 16:08:47)]]> http://www.ezbond.com.tw/Product-200938222112.html?CID=3_3 EG-503 and EG-505 are non-silicone lubricating, stable and long durability which apply to the plastic material specially. They are used especially in the precise-electronic part plastic bearing, gear, optical instrument, business machine, disc machine, mouse and micromotor else. They also has bears the fine lubrication (fine anti-noise) and non-destroy in the electronic part.

(2022/Apr/26 16:08:47)]]>
Tue, 26 Apr 2022 16:08:47 +0800
<![CDATA[Hoenle-UV Photo Source Equipment Fiber Optical Bluepoint Source (Hoenle Bluepoint 2 Easycure / Bluepoint 4 Ecocure / Bluepoint 4)(2022/Apr/26 16:05:46)]]> http://www.ezbond.com.tw/Product-20093502930.html?CID=4_4 The high efficiency UV point source is suitable for a point localization to cure the ultraviolet ray active adhesive and the conformal coating material precisely.

(2022/Apr/26 16:05:46)]]>
Tue, 26 Apr 2022 16:05:46 +0800
<![CDATA[Hoenle-UV Photo Source Equipment UV Surface-Photo (Hoenle UVHAND 250)(2022/Apr/26 16:06:09)]]> http://www.ezbond.com.tw/Product-200938182217.html?CID=4_4 High intensity hand-held UV lamp is suitable for the curing of the ultraviolet ray active paint, the adhesive and the conformal coating as well as uses in the fluorescence stimulation.

(2022/Apr/26 16:06:09)]]>
Tue, 26 Apr 2022 16:06:09 +0800
<![CDATA[Hoenle-UV Photo Source Equipment Bluepoint LED (Hoenle Bluepoint LED)(2022/Apr/26 16:06:26)]]> http://www.ezbond.com.tw/Product-200938184539.html?CID=4_4 UV LED point source may install 4 tube photo sources compared to traditional UV lamp which life long several times.

(2022/Apr/26 16:06:26)]]>
Tue, 26 Apr 2022 16:06:26 +0800
<![CDATA[Hoenle-UV Photo Source Equipment UV Surface Irradiation (Hoenle UVASPOT 400T/1000/2000 (03EUV Lighting))(2022/Apr/26 16:06:46)]]> http://www.ezbond.com.tw/Product-200938192955.html?CID=4_4 The versatile surface irradiation source is suitable for the curing of the ultraviolet ray active adhesive, the packing material and the paint as well as uses in the fluorescence.

(2022/Apr/26 16:06:46)]]>
Tue, 26 Apr 2022 16:06:46 +0800
<![CDATA[Hoenle-UV Photo Source Equipment UVACUBE (Hoenle UVACUBE 100 / 400 / 2000)(2022/Apr/26 16:07:08)]]> http://www.ezbond.com.tw/Product-200938193918.html?CID=4_4 The Versatile UV curing chamber is suitable for the curing of the ultraviolet ray active adhesive, the packing material and the paint as well as uses in the fluorescence.

(2022/Apr/26 16:07:08)]]>
Tue, 26 Apr 2022 16:07:08 +0800
<![CDATA[Hoenle-UV Photo Source Equipment LED UV- Pen / LED Power Pen (Hoenle LED UV-Pen / LED Power Pen)(2022/Apr/26 16:07:31)]]> http://www.ezbond.com.tw/Product-20093819558.html?CID=4_4 Simply and reliable bluepoint LED source.

(2022/Apr/26 16:07:31)]]>
Tue, 26 Apr 2022 16:07:31 +0800
<![CDATA[Hoenle-UV Photo Source Equipment UV Meter (01)(2022/Apr/26 16:07:49)]]> http://www.ezbond.com.tw/Product-20093820339.html?CID=4_4 Tue, 26 Apr 2022 16:07:49 +0800 <![CDATA[Zymet Underfill Encapsulants Underfill (Zymet Underfill Encapsulants - BGA/CSP Underfill Encapsulants)(2022/Apr/26 16:04:56)]]> http://www.ezbond.com.tw/Product-20093418404.html?CID=5_5 The Underfill is originally designs specially for the flip chip. But the thermal-expansion coefficient of flip chip w/silicone based material is much lower than the PCB's material, so it will have the relative displacement in the thermal recycle test, and will cause the mechanism fatigue and the bad welding. The underfill encapsulant material usually is the epoxy resin which use the capillarity principle to seep to the chip base, then cured. It can effectively enhance the spot's mechanical strength, thus enhances chip's service life.

(2022/Apr/26 16:04:56)]]>
Tue, 26 Apr 2022 16:04:56 +0800
<![CDATA[Zymet Underfill Encapsulants Edgebond (Nearby Chip Rubber Cementing Agent - Edgebond)(2022/Apr/26 16:05:14)]]> http://www.ezbond.com.tw/Product-200934184924.html?CID=5_5 The Edgebond usually fix the BGA / CSP chip in 4 corner to achieve the adhesive. It does not like the Underfill need to seep completely to the flip chip base to achieve the completely fixed. Works with the Edgebond does not need preheating nor putting into over for the Underfill to seep completely to the flip chip, this reduced the working-hour and the gel quantity. It may rework, therefore the cost is also low.

(2022/Apr/26 16:05:14)]]>
Tue, 26 Apr 2022 16:05:14 +0800
<![CDATA[Introduction of Customized Cooling Module Introduction of Customized Cooling Module (1)(2022/Apr/26 16:11:32)]]> http://www.ezbond.com.tw/Introduction-of-Customized-Cooling-Modul.html?CID=6_6 One-stop service for micro fans/cooling modules, providing consistent high-quality services through design, simulation, proofing, and mass production. The heat dissipation module can be used in lighting, communication, power supply, panel, medical, automotive and other industries. Our factory and R&D team have excellent design capabilities and long-term industrial experience, providing good mechanism design and heat dissipation solutions. Provide customers with professional advice through thermal simulation services to reduce customer cost and time

(2022/Apr/26 16:11:32)]]>
Tue, 26 Apr 2022 16:11:32 +0800
<![CDATA[Introduction of Grirem Advanced Materials Introduction of Grirem Advanced Materials (1)(2022/Apr/26 16:11:46)]]> http://www.ezbond.com.tw/Introduction-of-Grirem-Advanced-Material.html?CID=7_7 Nearly 50 years of research history of rare earth luminescent materials, Grirem is committed to the development of high-quality white LED phosphors and has taken the lead in breaking through the core of various mainstream commercial powders such as aluminate/nitrogen (oxide) compounds. The technology has won more than 30 patents, passed ISO9001:2000 quality management system certification, and complies with RoHS and REACH standards. A series of high-performance products are stably supplied to LED packaging companies, promoting the development of white light, green lighting and high-end display industries.

Choose Grirem advance materials, you choose the creativity, stability and sustainability of your company's long-term development.

(2022/Apr/26 16:11:46)]]>
Tue, 26 Apr 2022 16:11:46 +0800
<![CDATA[Dupont LED Silicone Materials Dupont LED Silicone Materials-01 (01)(2022/Apr/26 16:12:05)]]> http://www.ezbond.com.tw/Dupont-LED-Silicone-Materials.html?CID=8_8 Known for its technological innovations, DuPont brings unique capabilities and expertise to LED packaging, delivering silicone-based technology solutions to the lighting value chain. Dupont help improve performance and durability of LEDs with solutions that overcome high heat and light environment, protect against stress and transmit more light at every level— optical encapsulants, reflective materials and die attach materials.


Backed by DuPont’s expertise, support, and strong intellectual property (IP) in advanced optical materials, these cutting-edge materials will enable LED packaging manufacturers to improve the performance, reliability and cost of ownership for next-generation LED lighting designs (mini-LED、micro-LED).

(2022/Apr/26 16:12:05)]]>
Tue, 26 Apr 2022 16:12:05 +0800